Brake pads service intervals

Replace at thickness
Shimano
0.5 mma measurement
Shimano DM-RADBR10-03-ENG
Read 2026-08-20 · Revision 03

Job	Interval	Measured in	Source
Replace at thickness Shimano	0.5 mm	a measurement	Shimano DM-RADBR10-03-ENG Read 2026-08-20 · Revision 03

Notes on these figures

Replace at thickness · Shimano
Friction material, new is approximately 2 mm. Also scrap on oil or grease contamination regardless of thickness. Bed-in required after replacement.

Sources last checked 2026-08-20.

Gathered by hand from manufacturer documentation, never scraped. Manufacturers change these figures and sometimes contradict themselves. Always check your own manual, and treat this as a reference rather than an instruction.